應從屈曲可以防止壓縮凸緣。類似地網絡時，光束也應該從沉重的防止。通常，

應從屈曲可以防止壓縮凸緣。類似地網絡時，光束也應該從沉重的防止。通常，這些故障不會採取在正常裝貨地點，由於翼緣和腹板厚度的配比。但相當重負載下，這種故障是可能的，因此在這種情況下，成員必須被設計成能夠抵禦這種故障安全

結果 (英文) 1:

It should be possible to prevent buckling of the compression flange. Similarly network, from heavy beams should be prevented. Typically, these faults will not take place in normal loading, since the ratio of the thickness of the flange and web. But under very heavy load, this failure is possible, and therefore in this case, members must be designed to withstand this kind of fail-safe

結果 (英文) 2:

Bending should prevent compression of the flange. Similar networks, beams should also be prevented from being heavy. Typically, these faults are not taken at the normal loading location due to the ratio of wing edge and abdominal thickness. But under considerable load, this failure is possible, so in this case the member must be designed to withstand this failure

結果 (英文) 3:

Compression of the flange should be prevented by buckling. Similarly, the beam should also be prevented from being heavy. Generally, these failures will not be taken at the normal loading location due to the ratio of flange and web thickness. However, under heavy load, such failures are possible, so in this case, members must be designed to withstand such failures safely