將極片放置在電動滾輪試驗機平台，滾壓速度設定為 XX mm/分。將 3

將極片放置在電動滾輪試驗機平台，滾壓速度設定為 XX mm/分。將 3M Scotch®Magic™ 810膠帶取 150mm長度，膠帶20mm先黏貼在極板塗佈區。其餘膠帶以電動滾輪滾壓與極板黏合。

結果 (英文) 1:

The pole piece is placed in an electric wheel test machine platform,

rolling speed was set to XX mm / min.

The 3M Scotch®Magic ™ 810 tape take 150mm length,

tape stuck on 20mm plates coated first region.

The remaining adhesive tape with electric roller rolling and plate.

結果 (英文) 2:

Place the pole on the electric roller test machine platform,

The rolling speed is set to XX mm/min.

Take 3M Scotch®Magic ™ 810 tape 150mm in length,

Tape 20mm first glued to the plate coating area.

The rest of the tape is glued to the polar plate with electric roller roller spressurization.

結果 (英文) 3:

Place the pole piece on the platform of electric roller testing machine,
The rolling speed is set to XX mm / min.
Take 3M Scotch ® magic ™ 810 tape for 150 mm,
The tape 20mm shall be pasted on the coating area of the plate first.
The rest of the tape is rolled with the electric roller and bonded with the plate.