1、調取模组AA站原始數據并未發現黑點2、在FF測試時發現sensor

1、調取模组AA站原始數據并未發現黑點
2、在FF測試時發現sensor上有Particl，且震動后髒污位置发生变化
3、显微镜下sensor、lens內表面與lens螺紋能看到异物，用粘尘棒可清除
4、清除Particl后模组测试ok， Particl已被清除

結果 (英文) 1:

1, the raw data retrieval module aa station did not find black spots
2, found in the FF test the sensor particl, and the vibration the dirty position change
3, under the microscope the Sensor lens inner surface of the lens thread see the foreign body, Sticky stick to clear
4, Clear particl after module test ok, particl has been cleared

結果 (英文) 2:

1, access to module AA no black spots
2, were found in the original data on a FF sensor found when testing Particl and shake dirty location changes after
3, microscope lens and sensor, the lens surface under thread could see foreign body, sticky dust stick to clear
4, clear Particl ok,Particl module test has been cleared after

結果 (英文) 3:

1st, accent takes the mold train AA standing primary data not to discover that sunspot
2 and when the FF test discovered on sensor has Particl, and after the vibration, the sully position occurred to change under
3 and microscope sensor and lens internal surface and lens thread can see the foreign matter, after sticking the dust stick may eliminate
4, eliminates Particl the mold train to test ok, Particl is eliminated