B. JAN/03/2020因部份造成擊發原因不明確，安排邱員機上實際

B. JAN/03/2020因部份造成擊發原因不明確，安排邱員機上實際模擬當天維修動作及站立相關位置，模擬過程中發現該員將右手扶在門框後上方，正好壓在啟動BACKUP SLIDE的PULL HANDLE上，同時觀察比對工作者的高度、站立位置及拍打方式與OVER DOOR PANEL鬆脫落下之人員的動作(圖一),發現實際模擬狀態符合BACKUP SLIDE擊發作動條件。

結果 (英文) 1:

B. JAN / 03/2020 resulting in part due to firing reason is not clear, the arrangement Qiu teller machines simulate the actual day of the maintenance and operation of the relevant standing position, the simulation revealed that the staff will help in the top right-hand rear door frame, just press the start BACKUP the PULL HANDLE SLIDE while observing the height ratio of the workers, and the operation of standing position flapping manner oVER DOOR PANEL release of personnel falling (Figure 1), found that the actual status corresponds BACKUP SLIDE hit simulation attack operation conditions.

結果 (英文) 2:

B. JAN/03/2020 due to part of the cause of the blow is not clear, arrange Qiu staff on the actual simulation of the day's maintenance action and standing related position, simulation process found that the person will be right hand above the door frame, just pressed on the start BACKUP SLIDE HANDLE HANDLE, while observing the comparison of the worker's height, standing position and beat mode and OVER DOOR OFF the action of the personnel (Figure 1), found that the actual simulation state is in line with the simulation conditions of THE PERSON under the BACKUP.

結果 (英文) 3:

B. In Jan / 03 / 2020, some causes of the shooting were not clear. Qiu yuan was arranged to simulate the actual maintenance action and standing position of the day. During the simulation, it was found that he held his right hand behind the door frame and pressed it on the pull handle of the startup backup slide. At the same time, the height, standing position, beating mode and over door of the comparator were observed It is found that the actual simulated state of the action of the personnel under the release of panel (Figure 1) conforms to the firing action condition of backup slide.