AL1025：AIR PUMP OVERLOAD。抽油馬達過載項次 檢

AL1025：AIR PUMP OVERLOAD。抽油馬達過載項次 檢查項目 異常現象之處理方法1 電氣箱內THR43過載保護器有沒有跳掉。 按過載保護器復歸鍵。檢查PLC-X12.3線路。2 油箱馬達散熱是否順暢。 保持油箱馬達附近空氣流動。3 抽油馬達電纜線是否破皮、短路。 更換馬達電纜線。5 以上檢查都正常。 更換THR43過載保護器。

結果 (英文) 1:

AL1025: AIR PUMP OVERLOAD. Pumping motor overload
line item Check item anomalies of method
1 box THR43 electrical overload has not jump out. Press the reset button overload. Check the PLC-X12.3 line.
Motor cooling tank 2 is smooth. Air flow around the motor holding tank.
3 the motor pumping the cable is broken skin, a short-circuit. Replace the motor cable.
5 or more checks are normal. Replace the THR43 overload protection.

結果 (英文) 2:

AL1025: AIR PUMP OVERLOAD. Pumping motor overload
ItemS Check the handling of the project anomaly
1 The THR43 overload protector in the electrical box has not jumped off. Press the overload protector re-entry key. Check the PLC-X12.3 line.
2 Whether the fuel tank motor dissipates heat smoothly. Keep air flowing near the fuel tank motor.
3 Whether the pumping motor cable is broken or shorted. Replace the motor cable.
5 The above checks are OK. Replace the THR43 overload protector. ...

結果 (英文) 3:

Al1025: air pump overload
How to deal with the abnormal phenomenon of item inspection
1. Check whether the thr43 overload protector in the electrical box trips. Press the reset key of the overload protector. Check the plc-x12.3 line.
2 check whether the heat dissipation of the oil tank motor is smooth. Keep the air flow near the oil tank motor.
3. Check whether the electric cable of the pumping motor is broken or short circuited. Replace the electric cable of the motor.
5. All the above checks are normal. Replace the thr43 overload protector.