我們的安全感應器是在感應進出治具，防止進出時操作員的手被帶入機器內部。

我們的安全感應器是在感應進出治具，防止進出時操作員的手被帶入機器內部。當左右邊進出板輸送到達定位點後，操作員取放板，感應器感應無異物後，才會再次將輸送帶送進切割。機器的安全門已經關閉，因此操作員的手不可進入安全門的範圍正式等待輸送機構到達定位點後，操作員才可以取放。

結果 (英文) 1:

Our safety sensors are in the induction and out of the fixture to prevent hands and out of the operator is brought inside the machine.
When the conveyor reaches the left and right sides of the positioning points out, the operator panel to take place after the sensor senses no foreign body, will again cut the belt feeding.
Machine safety door has been closed, so that the hand of the operator can not enter the door of the safe range of
the official waiting transportation mechanism after reaching an anchor point, the operator can take place.

結果 (英文) 2:

Our safety sensors are inductive lying in and out of the tool to prevent the operator's hand from being brought into the machine when it comes in and out.
When the left and right side of the incoming and outgoing plate transport reaches the positioning point, the operator takes the release board and the sensor senses no foreign material before the conveyor belt is sent to the cutting again.
The safety door of the machine is closed so that the operator's hand is not allowed to enter the safety gate
The operator cannot pick up and place until the conveyor has reached the positioning point.

結果 (英文) 3:

Our safety sensor senses the in and out of the fixture to prevent the operator's hand from being brought into the machine when in and out.
When the left and right in and out plates are transported to the positioning point, the operator takes out and places the plates, and the inductor senses that there is no foreign matter, then the conveyor belt will be sent to the cutting again.
The safety door of the machine has been closed, so the operator's hand can't enter the range of the safety door
The operator can only take and place the conveyor after it reaches the positioning point.