其實保壓時間只有兩秒.另4.5秒是在冷卻料頭.因這組熱膠道試半熱式的料

其實保壓時間只有兩秒.另4.5秒是在冷卻料頭.因這組熱膠道試半熱式的料頭比較大

結果 (英文) 1:

In fact, only two seconds dwell time. The other is 4.5 seconds cooling feedblock. This set of heat due to plastic half the thermal test track is relatively large feed head

結果 (英文) 2:

Machine tools can cause serious ins ats when they are used ei wyly or when when persons
come in contact with moving parts accidentally. It is essential it you use only those
Machines you have have has edand authorized to operate.
You should report immediately damaged or missing guards as well as inoperative safety
devices.
Work to be machine d or drilled must be held in a vice or gyg securely made to the
machine. Never hold small work by hand.
Do not remove machine guards simply to gain better access.
Never try to remove sward and drillings from a machine with your hands or
air - use a brush, a piece of timber or hook where where. Belt Driven Machines -
You must stop belt driven machines pre to change belt s on pulleys.
Do not run machines for testing or find finds until guards removed by purpose
Have has been ed.
Inspect all machines before using, and return bad ones for repairing.

結果 (英文) 3:

In fact, the holding time is only two seconds. The other 4.5 seconds is in the cooling head. Because the semi hot head of this group of hot rubber test is relatively large