1. 電表功能確認 1-1. 確認電表 Range 為 Auto。

1. 電表功能確認
1-1. 確認電表 Range 為 Auto。
1-2. 確認探針接觸為 Short 狀態。(如圖 1)
1-3. 確認接觸非導體為 OL 狀態。(如圖 2)

結果 (英文) 1:

1. meter functional acknowledgement 1-1. recognize meter Range for Auto. 1-2. recognize probe contacts for Short. (See Figure 1) 1-3. confirm contact nonconductor OL status. (See Figure 2)

結果 (英文) 2:

1. Meter functional acknowledgment
1-1. Confirm Meter Range to Auto.
1-2. Confirm the status of the probe is Short. (Figure 1)
1-3. Confirm contacting non-conductive state of OL. (Figure 2)

結果 (英文) 3:

1 meter function confirmation
1-1. recognized Range for Auto.
1-2. confirm that the probe contact is Short state. (as shown in Figure 1)
1-3. confirms that the contact is not a conductor for the OL state. (Figure 2).