現在用的是Industrial panel，大致比較如下，目前沒有co

現在用的是Industrial panel，大致比較如下，目前沒有consumer panel資訊，正在請廠商提供，需要一點時間
另外如果要換panel因為尺寸差異，會增加很多修模費用及時間，建議不要更換

結果 (英文) 1:

Now have Industrial Panel, is set out below, there are currently no consumer Panel information, vendors, it takes a little time If you want to change the Panel because of size differences, a lot more repair costs and time, not recommended to replace

結果 (英文) 2:

Now with the Industrial panel, roughly following is a comparison, there is no consumer panel information, is provided by the manufacturer, please, take a little time to
another because of the size difference if you want to change the panel, it will add a lot of cost and time to repair the mold, it is recommended not to replace

結果 (英文) 3:

Now what uses is Industrial panel, is quite approximately as follows, currently does not have the consumer panel information, was asking the manufacturer to provide, needs time
other, if must trade panel because of the size difference, will increase many tool modification expenses and time, suggested that do not replace