安裝配件時,並沒有特別固定住,可能會因為人員的碰撞及地震等等的問題造成

安裝配件時,並沒有特別固定住,可能會因為人員的碰撞及地震等等的問題造成倒下的風險,在MFTB2023內部製程稽核的時候發現這個問題,因此要求生產單位製作安全固定架來預防零件倒下風險

結果 (英文) 1:

When installing accessories, they are not specifically fixed, which may cause the risk of falling due to collisions with people, earthquakes, etc. This problem was discovered during the MFTB2023 internal process audit, so the production unit was required to make safety fixing brackets to prevent parts. Risk of falling

結果 (英文) 2:

When installing accessories, they were not specially fixed, which may cause the risk of falling due to personnel collisions and earthquakes. This issue was discovered during the internal process audit of MFTB2023, and therefore the production unit is required to make a safety fixture to prevent the risk of parts falling down

結果 (英文) 3:

When installing accessories, they are not specially fixed, which may cause the risk of falling down due to personnel collision and earthquake. This problem was found during the internal process audit of MFTB2023, so the production unit is required to make a safety fixture to prevent the risk of falling down.