1. Rough polish (DSM 2147 )後有slight

1. Rough polish (DSM 2147 )後有slight scratch.因此,最後在Fine polish( DSM 2145)的時間(PC)必須加長,但有些嚴重的scratch加長polish time還是沒有改善(改善不了).以下是客戶的要求

a. 希望FUJIMI提供D50及D90的particle size distribution的大概 資料.

b. 客戶建議是否能將DSM 2146及DSM2147的D90 particle size distribution做窄一點(意思是將大的particle size過濾掉).

2. Fine polish(DSM 2145) 後的performance (如:Ra、gloss)能更好.因此,客戶希望我們能提供比DSM 2145小一點的abrasive size compound slurry.

Taniguchi-san,我們有這樣的產品嗎?如果,沒有.可以重新開發嗎?

結果 (英文) 1:

After 1. Rough polish (DSM 2147) has a slight scratch. Therefore, the last must longer in Fine polish (DSM 2145) time (PC), but some serious scratch longer polish time or no improvement (not improving). The following is the client requirements

a. FUJIMI hope to provide information about particle size distribution of D50 and the D90.

b. customer can recommend whether DSM D90 particle size distribution 2146 and DSM2147 do narrower (meaning the large particle size filtered out).

2 . performance after Fine polish (DSM 2145) (such as: Ra, gloss) better result, customers expect us to provide compound slurry DSM 2145 smaller than the size of Abrasive..

Taniguchi-San, we have such a product? If no can re-develop it?

結果 (英文) 2:

1. Rough polish (DSM 2147) after there is a scratch. Therefore, the time (PC) at Fine Polish (DSM 2145) must be lengthened, but some serious scratch long polish time has not improved (

Can't be improved). The following is the customer's requirements

a. It is hoped that FUJIMI will provide approximate data on the D50 and D90 sizeparticle distribution.

b. The customer suggests whether the D90 particle size distribution of the DSM 2146 and DSM2147 can be narrowed (meaning to filter out the large particle size).

2. Fine polish (DSM 2145) after the performance (e.g. Ra, gloss) can be better, so the customer expects us to be able to provide a brasive size saly sr. saly. Taniguchi-san, do we have such a product?

結果 (英文) 3:

One After rough polish (DSM 2147), there is light scratch. Therefore, the time (PC) in the final polish (DSM 2145) must be lengthened, but some serious scratch lengthening polish time still hasn't been improved (can't be improved). The following is the customer's requirements
A. fujimi is expected to provide the approximate data of D50 and D90's particle size distribution.
B. the customer suggests whether the D90 particle size distribution of dsm2146 and dsm2147 can be narrowed (which means filtering out the large particle size).
Two The performance (e.g. RA, gloss) after the finish finish finish (DSM 2145) can be better. Therefore, the customer hopes that we can provide an absolute size smaller than DSM 2145.
Taniguchi San, do we have such products? If not, can we redevelop it?