攪拌槽應避免空槽加溫，避免槽壁因為高溫而變形；如果生產前需要加熱來乾燥

攪拌槽應避免空槽加溫，避免槽壁因為高溫而變形；如果生產前需要加熱來乾燥槽壁，則先將蒸氣入口之手動閥關小(開度約1/3)，再開啟控制面板蒸氣開關，至槽內約3~5分鐘即可關閉蒸氣入口閥

結果 (英文) 1:

Avoid agitation tank heating recess, groove wall to avoid deformation due to high temperature; If heating to dry before the production of the groove wall, the first manual valve of small off vapor inlet (opening of about 1/3), and then open the control panel steam switch, to about 3 to 5 minutes the tank to close the steam inlet valve

結果 (英文) 2:

The mixing tank should avoid the air groove heating, avoid the groove wall because of high temperature deformation, if the production needs to be heated to dry the groove wall, the steam inlet of the manual valve closed small (open about 1/3), and then open the control panel steam switch, to the slot about 3 to 5 minutes to close the steam inlet valve

結果 (英文) 3:

In the mixing tank, avoid heating the empty tank to avoid deformation of the tank wall due to high temperature; if heating is needed to dry the tank wall before production, first turn down the manual valve at the steam inlet (the opening is about 1 / 3), then turn on the steam switch on the control panel, and then turn off the steam inlet valve after 3-5 minutes in the tank