阻抗試算軟體，是以阻抗線背面GND為鋪實銅為基礎代出試算後的阻抗值，只

阻抗試算軟體，是以阻抗線背面GND為鋪實銅為基礎代出試算後的阻抗值，只能作為參考值Texa Gerber阻抗線背面GND為鋪網銅，製作後所量測的阻抗值圖一、圖二皆會多20ohm

結果 (英文) 1:

Impedance spreadsheet software,
based on impedance line back surface GND is plated solid copper resistance value of the basic generation of a spreadsheet,
only as a reference value
Texa Gerber impedance line back surface GND for the laying of copper,
the resistance value view of a post-production as measured in the , Figure II all will be more 20ohm

結果 (英文) 2:

Impedance testing software,
Based on the gnD on the back of the impedance line as the solid copper, the impedance value after the test is calculated.
Can only be used as a reference value
The back of the Texa Gerber impedance wire GND is paving copper,
After the production measured impedance value map one, figure two will be more than 20ohm

結果 (英文) 3:

Impedance test software,
It is based on the GND on the back of the impedance line as laying solid copper to replace the impedance value after trial calculation,
Can only be used as a reference value
GND on the back of Texa Gerber impedance line is network laying copper,
After making, the measured impedance Figure 1 and Figure 2 will be 20 ohm more