1、調取模组FF站原始數據并未發現黑點2、在FQC測試時發現senso

1、調取模组FF站原始數據并未發現黑點
2、在FQC測試時發現sensor上有Particl，且震動后髒污位置发生变化
3、显微镜下sensor、lens內表面與lens螺紋能看到异物，用粘尘棒可清除
4、清除Particl后模组测试ok， Particl已被清除

結果 (英文) 1:

1, raw data retrieval module ff station did not find black spots
2, in fqc test found the sensor particl, and the vibration the dirty position change
3, under the microscope the Sensor lens inner surface of the lens thread see the foreign body, with Sticky rod to clear the
4, Clear the module test ok particl particl has been cleared

結果 (英文) 2:

1, access to raw data module FF station found no black spots
2, found on the sensor when the FQC test Particl and dirty location changes after shock
3, microscope lens and sensor, the lens surface under thread could see foreign body, with sticky stick to clear
4, clearing Particl ok,Particl module test has been cleared after

結果 (英文) 3:

1st, accent takes the mold train FF standing primary data not to discover that sunspot
2 and when the FQC test discovered on sensor has Particl, and after the vibration, the sully position occurred to change under
3 and microscope sensor and lens internal surface and lens thread can see the foreign matter, after sticking the dust stick may eliminate
4, eliminates Particl the mold train to test ok, Particl is eliminated