雖就理論而言，陽極於噴沙上會均勻生長，但實際上需考量到噴沙粗操度及噴沙

雖就理論而言，陽極於噴沙上會均勻生長，
但實際上需考量到噴沙粗操度及噴沙顆粒的尖端處或噴沙顆粒的上緣是陽極較難生長的地方，
故每個點的絕緣程度也不同，但 Process 時的相對電漿絕緣程度
是表面對表面，
故需得知 Susceptor 表面各點對點皆無導通現象，
線所以用一端接 Ground，一端裝治具的方式找出絕緣處較差的點，再以該點作基準點檢測表面。

結果 (英文) 2:

In theory, though, the anode will even grow in the sandblasting,
but in fact on the edge of the considerations required to exercise the degree of coarse sandblasting and sandblasting of particles at the tip of the anode or sandblasting particles is more difficult to grow the place,
so each insulation level points are different, but the relative degree of insulation Process plasma when
the surface of the surface,
it is required that the surface of each point Susceptor are no conduction phenomenon,
with one end of the line so Ground, one end mounted fixtures way to find insulation poor at point, and then to the point as a reference point detection surface.

結果 (英文) 3:

Although in theory, anode for sandblast will grow uniformly,
but actually need to consider to sandblast coarse degree and sandblasting particles at the tip or sandblasting particles on the margin of the is anode is hard to grow place,
so each point of the insulation level is different, but process relative plasma insulating degree
is surface to surface,
so that Susceptor surface each point to point Nix guided through,
lines with one end connected to the ground, is installed at one end of a fixture at poor insulation is found out, to the point as reference point detection surface.