其研究結果指出，使用25Hz與50Hz之刀把時銑刀的安裝長度在25mm

其研究結果指出，使用25Hz與50Hz之刀把時銑刀的安裝長度在25mm、刀把的鎖緊力在15 N.m時其刀把可產生較穩定的振幅。

結果 (英文) 1:

Its findings pointed out that when using the 25Hz and 50Hz knife installation length of milling cutter 25mm, knife 15 N.m, the locking force of the knife to produce more stable amplitude.

結果 (英文) 2:

The research results indicate that the use of 25Hz and 50Hz The installation length cutter knife in 25mm, knife locking force of 15 Nm when its knife can produce more stable amplitude.

結果 (英文) 3:

The research results show that using 25 Hz and 50 Hz knife cutter installation length of 25mm, the handle of the lock tightening force in N.m the knife can produce more stable amplitude in the.