為什麼掃描器角度會被移動到異常位置因而掃到錯誤wafer label?

為什麼掃描器角度會被移動到異常位置因而掃到錯誤wafer label?因為此機台近期多為生產hoop ring 產品，因治具無開孔工 hoop ring wafer label露出導致機台無法自動讀取，人員移動角度及位置藉以讓機台bypass ，改由人員手動掃描wafer label

結果 (英文) 1:

Why is the scanner angle moved to an abnormal position and the wrong wafer label is scanned? Because this machine is mostly used to produce hoop ring products recently. The hoop ring wafer label is exposed because there is no opening in the jig, so the machine cannot automatically read it. Move the angle and position to allow the machine to bypass and allow personnel to manually scan the wafer label.

結果 (英文) 2:

Why is the scanner angle moved to an abnormal position, resulting in an incorrect wafer label being scanned?
Because this machine has been mostly used for producing hoop ring products recently, the machine cannot be automatically read due to the exposure of the hoop ring wafer label without a hole opening worker on the fixture. The personnel's movement angle and position are used to bypass the machine, and instead, the personnel manually scan the wafer label

結果 (英文) 3:

Why is the scanner angle moved to an abnormal position and thus the wrong wafer label is scanned?

Because this machine is mostly producing hoop ring products recently, because the hoop ring wafer label of the fixture is not exposed, the machine can't read it automatically, so the personnel move the angle and position to make the machine bypass, and the personnel scan the wafer label manually instead.