AL1024：AIR FILTER OVERLOAD。空圧過濾馬達過載

AL1024：AIR FILTER OVERLOAD。空圧過濾馬達過載項次 檢查項目 異常現象之處理方法1 電氣箱內THR19、20過載保護器有沒有跳掉。 按過載保護器復歸鍵。檢查PLC-X11.2線路。2 檢查濾網是否有東西阻塞。 清洗濾網3 空壓馬達電纜線是否破皮、短路。 更換馬達電纜線。5 以上檢查都正常。 更換THR19、20過載保護器。

結果 (英文) 1:

AL1024: AIR FILTER OVERLOAD. Air-pressure filter motor overload
item processing method inspections of anomalies item
1 box THR19,20 electrical overload has not jump out. Press the reset button overload. Check the PLC-X11.2 line.
2 Check that there is something blocking the filter. Washing the filter
3 a pneumatic motor cable is broken skin, a short-circuit. Replace the motor cable.
5 or more checks are normal. Replace the THR19,20 overload protection.

結果 (英文) 2:

AL1024: AIR FILTER OVERLOAD. Empty filter motor overload
ItemS Check the handling of the project anomaly
1 The THR19, 20 overload protector in the electrical box has not jumped off. Press the overload protector re-entry key. Check the PLC-X11.2 line.
2 Check the filter for something blocking. Cleaning the filter
3 Whether the air-pressure motor cable is broken or shorted. Replace the motor cable.
5 The above checks are OK. Replace the THR19, 20 overload protector.

結果 (英文) 3:

Al1024: air filter overload
How to deal with the abnormal phenomenon of item inspection
1. Check whether the thr19 and 20 overload protectors in the electrical box are tripped. Press the reset key of the overload protector. Check the plc-x11.2 circuit.
2 check whether the filter screen is blocked. Clean the filter screen
3. Check whether the air pressure motor cable is broken or short circuited. Replace the motor cable.
5. All the above checks are normal. Replace the thr19 and 20 overload protectors.