第二部分使用具阻尼器之立銑刀與一般立銑刀比較側壁銑削，其二維均方根表面

第二部分使用具阻尼器之立銑刀與一般立銑刀比較側壁銑削，其二維均方根表面粗糙度(Sq)可由1.056m改善至0.636m，其加工品質的改善率為39.77%。

結果 (英文) 1:

Part two uses of damper milling cutter and milling cutter side milling, two-dimensional surface roughness of the root-mean-square (Sq) from 1.056  m improvement to 0.636  m, its processing quality improvement is 39.77%.

結果 (英文) 2:

The second part of the damper using a milling cutter and end mills are generally relatively sidewall milling, its two-dimensional rms surface roughness (Sq) by 1.056m improved to 0.636m, its processing quality improvement rate 39.77 %.

結果 (英文) 3:

The second part with damper milling cutter with general milling cutter milling of a side wall, the second dimension rms surface roughness degree (SQ) can by 1.056 obtained m improve to 0.636 obtained m, improve the processing quality of rate 39.77%.